Larunbata, 2015(e)ko urriak 10
KDEk gaur KDE Frameworks 5.15.0(a)ren argitalena iragartzen du.
KDE Frameworks are 60 addon libraries to Qt which provide a wide variety of commonly needed functionality in mature, peer reviewed and well tested libraries with friendly licensing terms. For an introduction see the KDE Frameworks release announcement.
Argitalpen hau planifikatutako hilabeteroko argitalpen sail baten zati da, garatzaileei hobekuntzak azkar eta aurreikus daitekeen eran erabilgarri ipintzen dizkiena.
Bertsio honetako berritasunak
Baloo
- Fix limit/offset handling in SearchStore::exec
- Recreate the baloo index
- balooctl config: add options to set/view onlyBasicIndexing
- Port balooctl check to work with new architecture (bug 353011)
- FileContentIndexer: fix emitting filePath twice
- UnindexedFileIterator: mtime is quint32 not quint64
- Transaction: fix another Dbi typo
- Transaction: Fix documentMTime() and documentCTime() using wrong Dbis.
- Transaction::checkPostingDbInTermsDb: Optimize code
- Fix dbus warnings
- Balooctl: Add checkDb command
- balooctl config: Add "exclude filter"
- KF5Baloo: Make sure D-Bus interfaces are generated before they are used. (bug 353308)
- Avoid using QByteArray::fromRawData
- Remove baloo-monitor from baloo
- TagListJob: Emit error when failed to open database
- Do not ignore subterms if not found
- Cleaner code for failing Baloo::File::load() on DB open fail.
- Make balooctl use IndexerConfig instead of manipulating baloofilerc directly
- Improve i18n for balooshow
- Make balooshow fail gracefully if database cannot be opened.
- Fail Baloo::File::load() if the Database is not open. (bug 353049)
- IndexerConfig: add refresh() method
- inotify: Do not simulate a closedWrite event after move without cookie
- ExtractorProcess: Remove the extra n at the end of the filePath
- baloo_file_extractor: call QProcess::close before destroying the QProcess
- baloomonitorplugin/balooctl: i18nize indexer state.
- BalooCtl: Add a 'config' option
- Make baloosearch more presentable
- Remove empty EventMonitor files
- BalooShow: Show more information when the ids do not match
- BalooShow: When called with an id check if the id is correct
- Add a FileInfo class
- Add error checking in various bits so that Baloo doesn't crash when disabled. (bug 352454)
- Fix Baloo not respecting "basic indexing only" config option
- Monitor: Fetch remaining time on startup
- Use actual method calls in MainAdaptor instead of QMetaObject::invokeMethod
- Add org.kde.baloo interface to root object for backward compatibility
- Fix date string displayed in address bar due to porting to QDate
- Add delay after each file instead of each batch
- Remove Qt::Widgets dependency from baloo_file
- Remove unused code from baloo_file_extractor
- Add baloo monitor or experimental qml plugin
- Make "querying for remaining time" thread safe
- kioslaves: Add missing override for virtual functions
- Extractor: Set the applicationData after constructing the app
- Query: Implement support for 'offset'
- Balooctl: Add --version and --help (bug 351645)
- Remove KAuth support to increase max inotify watches if count too low (bug 351602)
BluezQt
- Fix fakebluez crash in obexmanagertest with ASAN
- Forward declare all exported classes in types.h
- ObexTransfer: Set error when transfer session is removed
- Utils: Hold pointers to managers instances
- ObexTransfer: Set error when org.bluez.obex crashes
Extra CMake Modules
- Update GTK icon cache when installing icons.
- Remove workaround to delay execution on Android
- ECMEnableSanitizers: The undefined sanitizer is supported by gcc 4.9
- Disable X11,XCB etc. detection on OS X
- Look for the files in the installed prefix rather the prefix path
- Use Qt5 to specify what's Qt5 installation prefix
- Add definition ANDROID as needed in qsystemdetection.h.
Framework Integration
- Fix random file dialog not showing up problem. (bug 350758)
KActivities
- Using a custom matching function instead of sqlite's glob. (bug 352574)
- Fixed problem with adding a new resource to the model
KCodecs
- Fix crash in UnicodeGroupProber::HandleData with short strings
KConfig
- Mark kconfig-compiler as non-gui tool
KCoreAddons
- KShell::splitArgs: only ASCII space is a separator, not unicode space U+3000 (bug 345140)
- KDirWatch: fix crash when a global static destructor uses KDirWatch::self() (bug 353080)
- Fix crash when KDirWatch is used in Q_GLOBAL_STATIC.
- KDirWatch: fix thread safety
- Clarify how to set KAboutData constructor arguments.
KCrash
- KCrash: pass cwd to kdeinit when auto-restarting the app via kdeinit. (bug 337760)
- Add KCrash::initialize() so that apps and the platform plugin can explicitly enable KCrash.
- Disable ASAN if enabled
KDeclarative
- Small improvements in ColumnProxyModel
- Make it possible for applications to know path to homeDir
- move EventForge from the desktop containment
- Provide enabled property for QIconItem.
KDED
- kded: simplify logic around sycoca; just call ensureCacheValid.
KDELibs 4 Support
- Call newInstance from the child on first invocation
- Use kdewin defines.
- Don't try to find X11 on WIN32
- cmake: Fix taglib version check in FindTaglib.cmake.
KDesignerPlugin
- Qt moc can't handle macros (QT_VERSION_CHECK)
KDESU
- kWarning -> qWarning
KFileMetaData
- implement windows usermetadata
KDE GUI Addons
- Not looking for X11/XCB makes sense also for WIN32
KHTML
- Replace std::auto_ptr with std::unique_ptr
- khtml-filter: Discard rules containing special adblock features that we do not handle yet.
- khtml-filter: Code reorder, no functional changes.
- khtml-filter: Ignore regexp with options as we do not support them.
- khtml-filter: Fix detection of adblock options delimiter.
- khtml-filter: Clean up from trailing white spaces.
- khtml-filter: Do not discard lines starting with '&' as it is not a special adblock char.
KI18n
- remove strict iterators for msvc to make ki18n build
KIO
- KFileWidget: parent argument should default to 0 like in all widgets.
- Make sure the size of the byte array we just dumped into the struct is big enough before calculating the targetInfo, otherwise we're accessing memory that doesn't belong to us
- Fix Qurl usage when calling QFileDialog::getExistingDirectory()
- Refresh Solid's device list before querying in kio_trash
- Allow trash: in addition to trash:/ as url for listDir (calls listRoot) (bug 353181)
- KProtocolManager: fix deadlock when using EnvVarProxy. (bug 350890)
- Don't try to find X11 on WIN32
- KBuildSycocaProgressDialog: use Qt's builtin busy indicator. (bug 158672)
- KBuildSycocaProgressDialog: run kbuildsycoca5 with QProcess.
- KPropertiesDialog: fix for ~/.local being a symlink, compare canonical paths
- Add support for network shares in kio_trash (bug 177023)
- Connect to the signals of QDialogButtonBox, not QDialog (bug 352770)
- Cookies KCM: update DBus names for kded5
- Use JSON files directly instead of kcoreaddons_desktop_to_json()
KNotification
- Don't send notification update signal twice
- Reparse notification config only when it changed
- Don't try to find X11 on WIN32
KNotifyConfig
- Change method for loading defaults
- Send the appname whose config was updated along with the DBus signal
- Add method to revert kconfigwidget to defaults
- Don't sync the config n times when saving
KService
- Use largest timestamp in subdirectory as resource directory timestamp.
- KSycoca: store mtime for every source dir, to detect changes. (bug 353036)
- KServiceTypeProfile: remove unnecessary factory creation. (bug 353360)
- Simplify and speed up KServiceTest::initTestCase.
- make install name of applications.menu file a cached cmake variable
- KSycoca: ensureCacheValid() should create the db if it doesn't exist
- KSycoca: make global database work after the recent timestamp check code
- KSycoca: change DB filename to include language and sha1 of the dirs it's built from.
- KSycoca: make ensureCacheValid() part of the public API.
- KSycoca: add a q pointer to remove more singleton usage
- KSycoca: remove all self() methods for factories, store them in KSycoca instead.
- KBuildSycoca: remove writing of the ksycoca5stamp file.
- KBuildSycoca: use qCWarning rather than fprintf(stderr, ...) or qWarning
- KSycoca: rebuild ksycoca in process rather than executing kbuildsycoca5
- KSycoca: move all of the kbuildsycoca code into the lib, except for main().
- KSycoca optimization: only watch the file if the app connects to databaseChanged()
- Fix memory leaks in the KBuildSycoca class
- KSycoca: replace DBus notification with file watching using KDirWatch.
- kbuildsycoca: deprecate option --nosignal.
- KBuildSycoca: replace dbus-based locking with a lock file.
- Do not crash when encountering invalid plugin info.
- Rename headers to _p.h in preparation for move to kservice library.
- Move checkGlobalHeader() within KBuildSycoca::recreate().
- Remove code for --checkstamps and --nocheckfiles.
KTextEditor
- validate more regexp
- fix regexps in HL files (bug 352662)
- sync ocaml HL with state of https://code.google.com/p/vincent-hugot-projects/ before google code is down, some small bugfixes
- add word-break (bug 352258)
- validate line before calling folding stuff (bug 339894)
- Fix Kate word count issues by listening to DocumentPrivate instead of Document (bug 353258)
- Update Kconfig syntax highlighting: add new operators from Linux 4.2
- sync w/ KDE/4.14 kate branch
- minimap: Fix scrollbar handle not being drawn with scrollmarks off. (bug 352641)
- syntax: Add git-user option for kdesrc-buildrc
KWallet Framework
- No longer automatically close on last use
KWidgetsAddons
- Fix warning C4138 (MSVC): '*/' found outside of comment
KWindowSystem
- Perform deep copy of QByteArray get_stringlist_reply
- Allow interacting with multiple X servers in the NETWM classes.
- [xcb] Consider mods in KKeyServer as initialized on platform != x11
- Change KKeyserver (x11) to categorized logging
KXMLGUI
- Make it possible to import/export shortcut schemes symmetrically
NetworkManagerQt
- Fix introspections, LastSeen should be in AccessPoint and not in ActiveConnection
Plasma Framework
- Make tooltip dialog hidden on the cursor entering the inactive ToolTipArea
- if the desktop file has Icon=/foo.svgz use that file from package
- add a "screenshot" file type in packages
- consider devicepixelration in standalone scrollbar
- no hover effect on touchscreen+mobile
- Use lineedit svg margins in sizeHint calculation
- Don't fade animate icon in plasma tooltips
- Fix eliding button text
- Context menus of applets within a panel no longer overlap the applet
- Simplify getting associated apps list in AssociatedApplicationManager
Sonnet
- Fix hunspell plugin ID for proper loading
- support static compilation on windows, add windows libreoffice hunspell dict path
- Do not assume UTF-8 encoded Hunspell dictionaries. (bug 353133)
- fix Highlighter::setCurrentLanguage() for the case when previous language was invalid (bug 349151)
- support /usr/share/hunspell as dict location
- NSSpellChecker-based plugin
You can discuss and share ideas on this release in the comments section of the dot article.
Pakete bitarrak instalatzea
Linux-en, zure banaketa gogokorako paketeak erabiltzea da KDE Frameworks eskuratzeko gomendatutako modua. Lortu KDE softwarea zure Linux banaketaren wiki orrian
Sorburuetatik konpilatzea
KDE Frameworks 5.15.0(e)ren sorburu-kode osoa askatasun osoz zama-jaitsi daiteke. Konpilatzeko eta instalatzeko jarraibideak eskuragarri daude KDE Frameworks 5.15.0 Informazio orrian.
Sorburuetatik eraiki daiteke cmake .; make; make install oinarrizko komandoak erabiliz. 1. mailako «framework» bakar baterako, hau izaten da irtenbiderik errazena. «Frameworks»ekin laguntzeko edo multzo osoaren garapenaren aurrerapenaren jarraipena egiteko interesa dutenak kdesrc-build erabiltzera animatzen ditugu. Frameworks 5.15.0(e)k Qt
A detailed listing of all Frameworks with API documentation is on api.kde.org.
Engaia zaitez
«Frameworks»en garapenaren aurrerapenari jarraipena egiteko eta horretan laguntzeko interesa dutenek git gordetegiak ikuskatu eta KDE Frameworks garatzeko posta-zerrendako eztabaiden jarraipena egin dezakete. Gidalerroak eta proiektuaren egungo egoera eta egitasmoak «Frameworks»en wikian eskuragarri daude. Denbora errealeko eztabaidak #kde-devel IRC kanalean, Libera Chat-en, izaten dira.
KDEri laguntzea
KDE Software askeko komunitate bat da, beraien denbora eta ahalegina borondatez ematen dutenen laguntzagatik existitzen eta hazten dena. KDE beti dago boluntario eta laguntzaileen bila, izan kodetzeko laguntza, akatsak konpontzeko edo jakinarazpenak bidaltzeko, dokumentazioa idazteko, itzulpenak, promozioa, dirua, etab. Laguntza guztiak esker onez hartu eta onartzen dira. Irakurri KDEri laguntzea orria informazio zabalagoa eskuratzeko edo egin zaitez KDE e.V.ren bazkide babeslea gure Batu jokora ekimenaren bidez.